Merlin Direct Flow Reverse Osmosis by General Electric
Merlin Direct Flow Reverse Osmosis by General Electric
Delivery: 3 weeks
Merlin Direct Flow Reverse Osmosis by General Electric
The innovation for 30 years, reverse osmosis technology:
The new Merlin RO system also without water tank and with an optimized ratio of 2:1 immediately only around 1.5 liters of filtered water per minute (about 2000 l / day) usual high rejection!
RO plant for filtered drinking water, no extra water tank.
The Merlin Reverse Osmosis System generated from tap water filtered water for the highest purity with a very high flow rate (1.5 l / min). It is very suitable for preparing baby food, even poor raw water quality (such as well water or high levels of nitrate, copper, lead exposure)
The device does not require a water tank! The discharge takes place via the included extra small cock (Touch Flow), the switch at the sink install is (Ø 11.5 or 12 mm).
Specifications:
prefilter:
AK universal filter for preliminary separation of coarse particles, change interval: every 6 months
Main filter:
2x wound TFC Membrane "Merlin." Change interval: every 3-5 years experience value
postfilter:
Inline carbon filter. Change interval: every 6 months
power:
bar about 3500 liters per day at 4 bar and 10 ° C (± 15%) and an average of 1.5 l / min, Range 3-7, concentrate ratio (waste water) to permeate (pure water) 2:1 to 3: 1 (depending on the line pressure)
Dimensions: Filter unit: (HxWxD) 43.3 x 51.7 x 24.6 cm
The system can save space, there are no tank, upright or lying installed under the sink, but also in the basement with a supply line to the sink.
| Item ID | 60040056 |
| Condition | New & with original packaging |
| Variation ID | Merlin Direct Flow |
| Manufacturer | General Electric |
| Manufacturing country | Germany |
| Content | 1 piece |
| Weight | 5500 g |
| Net weight | 5500 g |
| Dimensions | 0×0×0 mm |
Item list
